Trash Chute Hydraulic Closer. 10 Inch Retracted Piston Pump for Bottom & Side Hinged Laundry and Garbage Doors.

This is the most popular 10 inch retracted replacement trash chute hydraulic closer in the chute industry for primarily your trash and sometimes your linen chute door. But more often it is used for garbage chute doors. The thick silver aluminum tube part of the cylinder measures 10 inches long, and 1″ thick diameter. The thin rod measures 5/16″ in thickness, and is in the retracted position by default. When you door opens completely the shaft extends itself an additional 5-1/2 inches, and measure 17 -1/2 total inches when fully extended.

HARDWARE PARTS INCLUDED: 1 piston closure, 1 pivot pin (assembled), 1 bracket (assembled), 1 pin with clevis nut for the cross hole (lose for you to install). [ Look at the pictures, and you will receive the identical product, and parts ]

FITS THE FOLLOWING HINGED DOORS: Bottom (BH) and Side Hinged (SH) Stainless Steel Doors

APPLICATIONS: Trash, Garbage, Rubbish, Laundry, Linen, and Recycle UL rated intake doors.

FITS THE FOLLOWING SIZE DOORS:

15″ WIDE x 18″ HIGH (Most Popular)
18″ W x 18″ H
21″ W x 18″ H
21″ W x 21″ H
24″ W x 24″ H

COMPATIBILITY For Chute Hydraulic Closer:

35% of doors in the industry, including Acme Chutes, Action Chutes, 21st Century Chutes, Chutes Doctor, Chutes International Manufacturing, Cutler Chutes, US Chutes, Valiant Chutes, Western Chutes, Wilkinson Hi Rise…

Make sure you have an exact fit by measuring your current rubbish door. Make sure that it is compatible with one of the sized doors noted above.

If you are replacing the current trash chute door closer, then look at your existing hydraulic, and make sure that it has the pin fittings, and brackets on each end.

Installation Test: Make sure that the door latches and that the coil springs absorbs and dampens the spring smoothly to prevent injury.

Related Video Shorts