Laundry Chute Doors 24 x 24 Stainless Steel Side Hinged Intake Door – Midland Style

• Self / Automatic Closing
• Self Latching
• Silent / Noiseless function.
• Fire Rated:  1-1/2 hour UL Class B Fire Rated Certified Label – 30-minute temperature rise of 250 Degrees Fahrenheit Max

INCLUDES:

• T Handle (Chrome), Latch assembly x1
• Keys (All keyed alike) x2
• Set of Blank Trim (One set of 4 Blank trim).  ALERT: Embossed RUBBISH, LINEN, or RECYCLE trim is sold separately.
• 8 Inch Silver Hydraulic Retracted Closer x1.

SPECIFICATIONS

• Material: Door panel made with 20 gauge type 304 stainless steel front, and 16 gauge aluminized frame in the back.
• Made in the USA.
• Complies with national building codes, NFPA-82 and ASTM standards.

HOW TO MEASURE FOR INSTALLATION:

You need to get the “Rough Opening” for an accurate fit. See the measurements required to install in a CHUTE or a WALL OPENING below:

1) CHUTE / ROUGH OPENING: 25.375 inches wide by 24.437 inches tall opening.

2) WALL OPENING: 25.875 inches wide by 24.687 inches tall opening.

There are two ways to measure the rough opening. 1) Although not as convenient, the best method is by removing your existing door so that you can measure all four sides without any obstruction. 2) Without removing your current door, going into the opening approximately 3 to 4 inches, you will be past the door and only have the wall to measure.

Recommended Door Height: Finished floor to door handle measurement = 40.75 Inches

Related Video Shorts